Elpress UK - in the UNITED KINGDOM tel: +44 (0)1744 762 929 - fax: +44 (0)1744 762 930 - email us

E-Tech Components (UK) Ltd - Elpress in the UK

E-Tech Components (UK) LtdWe are the sole distributor for Elpress in the UK

The Elpress crimping system consists of high quality Elpress Copper Tube products.
The range of Crimp terminals in the system consist of Elpress Copper Tube Lugs, Elpress Copper Tube Terminals, Elpress Copper Tube Splices, Elpress Narrow Palm Terminals, Elpress Copper Tube Pin Terminals, Elpress Bi-metallic Crimp Terminals, Elpress Bi-metallic Pin terminals, Elpress transformer lugs and other specialist Elpress crimp terminals that can be made to order to suit your specific needs.

Elpress Cable LugsThe Elpress range of Crimp Terminals are all tested to IEC61238-1 and when crimped using the correct Elpress Crimp Tools will conform to all relevant international standards including the BS7609 and BS7727

The Elpress range also consists of Elpress Insulated terminals, these terminals are LSOH, (Low Smoke Zero Halogen) Halogen Free type terminals which is an extra safety feature and ideal for use in railways, underground, mines, hospitals, buildings and anywhere where safety is paramount.

The Elpress easy entry system for the terminals allows the cable to insert easily in to the Elpress Insulated terminals and speed up installation. The Elpress Insulated terminals have been used on the Dubai Metro project. The Dubai Metro project required products of high quality and the LSOH / Halogen free features of this project was imperative when plans and designs were being made for the Dubai Metro Project. The Elpress Pre-insulated Terminals must be installed using the Elpress MINIFORCE™ range of Elpress crimp tools to ensure that they are crimped in accordance with BS7727 Standard.

AUTHORIZED ELPRESS SERVICE CENTRE
Elpress Authorised Service Centre
E-Tech is a specialised Elpress distributor and our authorized Elpress service department maintains, repairs, checks, calibrates and certifies Elpress tools and power sources. After equipment has been overhauled by the service department a certificate is issued to verify the performance of the tool.

To ensure that your crimped connections maintain a high and even level of quality, regular checks of the crimping tools must be carried out. Maintenance procedures are facilitated by signing special preventive maintenance agreements, whereby we call in your tools in accordance with the agreement and return them, checked and certified.

E-Tech can offer a full repair and calibration service for all mechanical and hydraulic crimp tools. Crimp tools are repaired and calibrated to the Manufacturers guidelines and in accordance with BS7609 and BS7727.

If you suspect damage or a fault in your Elpress equipment, please contact our service department immediately for checking of necessary repair,

To return tools / products to us for: Service, Repair, Calibration, Warranty - click here

System Elpress
Etech Components
Elpress News
 

Copyright © Etech Components All rights reserved.

Technical Data subject to change without notice

 
Home
About Us
Site Map
Contact Us
Elpress Products
Elpress Pre-Insulated Terminals (Halogen Free)
Elpress End Terminals (Ferrules) (Halogen Free)
Elpress Un-Insulated Terminals
Elpress Copper Tube Terminals
Elpress C-Sleeves / C-Connectors
Elpress Aluminium Terminals
Elpress Bi-Metallic Terminals
Elpress Crimping Tools
Elpress Manual Crimp Tools
Elpress Hydraulic Tools
Elpress Screw Connectors
Elpress Cutting & Stripping Tools
Elpress Deep Earthing
Elpress Earthbond
Sectors
Elpress Wind Power/Renewables
Elpress Traction
Elpress Trafo/Transformers

Service Department

Academy - Staff Training
E-Tech Components (UK) Ltd

E-Tech Components (UK) Ltd
are the Sole UK Distributor for Elpress AB


Elpress Cable Lugs, Crimping Tools, Pre Insulated terminals